Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 270 / 330

8 Interfaces and Peripherals Interfaces
270 Rev. 9 (09/2023) Krautkrämer USM 100
WLAN
The USB interface type A (see page 268) can be used
to connect a WLAN adapter. When connected via
WLAN the software
USM 100 PC can be used to com-
pletely operate the instrument (see page 58)
Note
It is recommended to plug in the WLAN
adapter together with an extraction tool to
make it easier to pull out the very small
adapter later.
– Place the WLAN adapter (1) in the extraction tool (3).
– Plug both together into the USB-A socket.
– Pull the WLAN adapter out of the socket by the loop
(2) of the extraction tool.
After switching on the WLAN connection you can select
a network and make the required settings (see
page 113).
1
2
3