Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 264 / 330

7 Maintenance and care Software updates
264 Rev. 9 (09/2023) Krautkrämer USM 100
7.4 Software updates
You can install the latest software updates for the
USM 100 yourself.
Note
It is recommended to check for latest up-
dates before using the instrument.
Look up the version installed in your instrument in the
About section (see page 119) in the General settings
menu (see page 108).
Software updates are available here:
https://www.inspectionworks.com/dis-store/#/store/public
You can install the update file from a USB stick. If no
USB stick is inserted or if no update file is found on it,
the instrument will automatically try to connect to the
InspectionsWorks platform and download and install
the update file from there. The prerequisite for this is an
established Internet connection via LAN (see page 269)
or WLAN (see page 270).
Installing an update
ATTENTION
During the update process, the power supply
must not be interrupted. The battery charge
must be at least 60% or you must connect
the instrument to the power adapter.
– Copy the update file into the root directory of the USB
stick.
– Insert the USB stick into the socket on the top of the
instrument (see page 54).
– Access the General settings menu via the Main
menu (see page 68).
– Select Updates from the left column.
– Tap on Check . The data of the update files is shown.
– Tap on Install to start the installation.
After successful installation the instrument is shut down
automatically. Then, you can power on the instrument
again and use the new software version.