8
leak
SMART
™
Sensor Setup and Operation
1.
Pair each leakSMART
™
Sensor with your smart home system
•
Your leakSMART
™
sensor provides an audible water detection
alarm, even without connection to your leakSMART
™
Hub —
but pairing means the system will signal your leakSMART
™
Valve to automatically shut off your water and send you
instant notifications, preventing water damage within 10
seconds.
•
Install the provided 3 AAA alkaline batteries (DO NOT screw
on battery door cover until pairing is successfully completed).
The sensor will beep once and blue indicator light will flash
rapidly.
•
On the leakSMART
™
Hub briefly press the blue button once to
enter into pairing mode. As a reminder, a green flashing light
on the leakSMART
™
Hub indicates pairing mode and will last
3 minutes while in pairing mode.
•
On the leakSMART
™
Sensor press black button located above
the batteries once. The sensor will beep 5 times indicating
a successful pairing. leakSMART
™
App should register ‘1
Sensor Reporting’ on the home screen (located below the
valve icon).
•
We recommend naming your sensor in the overview page of
your APP (i.e. Bath, Kitchen) .
leakSMART
™
Sensor is now paired and should display a flashing
blue light every 60 seconds.
