B7. Relocate
1. Plug the Device into an electrical outlet between your router (Host Wi-Fi) and the Wi-Fi dead zone.
The location you choose must be within the range of your existing host Wi-Fi.
2. Wait until the Wi-Fi Signal LEDs is ON. If the signal is weak, relocate the Device closer to your router for better Wi-Fi signal.
Tips:
Use your phone to find the ideal location for
the Device. If your phone’s Wi-Fi signal
(received from your router) is higher than 3
levels, it is the ideal spot to install the Device.
If not, we recommend you move it closer to
your router for better Wi-Fi signal.
Ideal Location
Too Far Away
Flashing
The Best Location
OPTION TWO
Wi-Fi to Wi-Fi Extension Quick Setup
Recommend for midsize yard
Configuration
B1
.
Installation
Please refer to
OPTION ONE.
A1, A2, A3, A5
,
A6
B2
.
Connect to the Device
Please refer to
OPTION ONE
A7.
B3
.
Click
“Wizard”
.
B4
.
Click
“Repeater”
.
For Signal Band (2.4G) User
For Dual Band (2.4G+5G) User
B5. Select your router's Wi-Fi SSID(s) and enter the password(s).
Either keep the same SSID(s) as your host Wi-Fi or create
new name(s) for the extended network(s).
B6. Verify your wireless settings and click
"Connect"
.
Wi-Fi Signal LEDs should turn on and stay solid,
indicating successful connections.
or
Host Wi-Fi Name
Host Wi-Fi Password
Extended Network Name
The Best Location
Wi-Fi to Wi-Fi Extension
Please install the device as follows:
Wi-Fi Signal 2 x LEDs or 3 x LEDs are ON
Wi-Fi Signal 1 x LED is ON or Flashing, which could cause network disconnection or slow internet.
Picture with “ ”: Recommended
Picture with “ ”: Not Recommended
GNU General Public License Notice
This product includes software codes developed by third parties. These software
codes are subject to either the GNU General Public License (GPL), Version 2,
June 1991 or the GNU Lesser General Public License (LGPL), Version 2.1,
February 1999.
You can copy, distribute, and/or modify in accordance with the terms and conditions
of GPL or LGPL.
The source code should be complete, if you want us to provide any additional source
code files under GNU General Public License (GPL), please contact us in these matters.
We are committed to meeting the requirements of the GNU General Public License (GPL).
You are welcome to contact us local office to get the corresponding software and licenses.
Please inform us your contact details (full address)and the product code. We will send you a
software package with the software and license for free.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied
warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Please refer to the GNU General Public License Web site for further information.
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
http://www.gnu.org/licenses/gpl.html
Q1. Why doesn’t the login page appear after entering
http://ap.setup?
• If your computer is wirelessly connected, please verify that you have connected to
the device’s SSID. If your computer is connected via an Ethernet cable, please verify
that the connection is stable.
• Make sure your computer is set to obtain an IP address automatically.
• Use the IP address to log in to the page. The default IP is 192.168.10.1. If the
Device is connected to the host Wi-Fi, please go to the router’s DHCP client list to
obtain the Device’s current IP address.
• Please reset the device and try again. If the problem still exists
Q2. How do I restore the device to its factory default settings?
• While the Device is powered on, press and hold the Reset button until all the
LEDs turn on momentarily.
Q3. What should I do if the LED does not change to solid after completing ?
• You may have entered the incorrect Wi-Fi password of your host Wi-Fi during the configuration.
please log into the Device’s web-based interface to check the password and try again.
• Reset the device and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access control
list (ACL) on my Router. What should I do before configuring and using the Device
?
• If you have enabled those functions of your Router, you may need to disable them first.
And then follow Method ONE or Method TWO to complete the configuration.
FAQ (Frequently Asked Questions)
Firmware Upgrade
Firmware upgrade can fix bugs of the Device. However, We
DO NOT
recommend you upgrade the firmware of the Device if it works normally.
1.
Click
“Setup->Upgrade Firmware”
.
2.
Click
“Browse”
to locate the download new firmware file.
3.
Click
“Apply”
button, and wait for a few minutes to the firmware upgrade to
be complete.
Warranty voids if you interrupted the upgrade procedure.
NOTE:
Never interrupt the upgrade procedure by closing the web browser or physically
disconnect your computer from the Device. If the procedure is interrupted, the firmware
upgrade will fail, and you may have to return the Device to the dealer to ask for help.
1. Launch a web browser and enter
http://wifi.wavlink.com
in the
address field.Enter
(all
admin
lowercase) to login.
If the login window does not
pop up, please refer to the
FAQ>Q1.
Change Login Password
NOTE:
The default login password of the Device is
“admin”
, We
strongly
recommend you change the default login password.
2. Click
“Setup->
Login Password”
.
3. Enter the old password,
then enter the new password
and click
“Apply”
.
