REV.E1
Hardware Overview
Primary Extender
Default Parameters
Web:
http://wifi.wavlink.com
Default IP:
192.168.10.1
Login Password:
admin
LED indicators
POWER
ON:
The Device is powered on
OFF:
The Device is not receiving electrical power.
LAN/WAN
ON:
The Ethernet port is connected.
OFF:
The Ethernet port is disconnected.
AC1200
High Power
Outdoor Gigabit Wi-Fi Range Extender
WL-WN572HG3
2.4G SSID:
WAVLINK-N
5G/AC SSID:
WAVLINK-AC
Wireless Key:
no
Wi-Fi Signal
Mode
AP/Router
Repeater
WISP
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
Flashing
Description
Wi-Fi Signal output power 100%
Better reception: signal strength 75% to 100%
Good reception: signal strength 50% to 75%
Weak reception: signal strength below 50%
Disconnected
Assembly
A1.
Fasten the main body holder
A2.
Plug in the Device
A3
. Connect one end of an Ethernet cable to
“ POE”
port of POE converter.
A4.
Connect one end of an Ethernet cable to
“LAN DATA IN”
port of POE
converter, and connect the other end to a
“LAN”
port of your Router.
A5.
Plug in the power connector to the
“DC24V”
port of POE converter,
then plug the power adapter into an electrical outlet.
A6.
Push the
“ON/OFF”
button on the POE converter to power on.
POE
Converter
A3
A4
A5
A6
A7. Connect to the Device
OPTION ONE
LAN to Wi-Fi Extension Quick Setup
Recommend for big yard
Installation
For Windows User
1. Unplug the Ethernet cable from your
computer (if any).
2. Click the Wireless Network Connection
icon on your taskbar.
3. Click the refresh icon and connect to the
Device‘s network:
WAVLINK-N
or
WAVLINK-AC.
For Mac OS X User
or
1. Unplug the Ethernet cable from
your computer (if any).
2. Click the Wi-Fi icon in the top right
corner of the screen, and connect
to the Device’s network:
WAVLINK-N
or
WAVLINK-AC
.
WAVLINK-N
WAVLINK-AC.
WAVLINK-N
WAVLINK-AC.
2.4G RP-SMA Antenna Connectors
3 x Wi-Fi Signal LEDs
Wi-Fi LED
WAN/LAN LED
POWER LED
Reset button
LAN Port (POE)
Grounding Terminal
Support passive POE power supply via
Ethernet cable.
1. Ensure you use a certified CAT5e/CAT6
Ethernet cable with RJ45 connectors.
2. Ensure the length of the Ethernet cable is
less than 60 meters (196ft.).
ATTENTION:
A8. Launch a web browser and type
http://wifi.wavlink.com
in the
address field. Enter
(all
admin
lowercase) to login.
If the login window does not
pop up, please refer to the
FAQ>Q1.
A9. Click “
Wizard
”
.
A10. Click “
AP
(
LAN
Bridge
)
”
.
For Single Band (2.4G) Users
1. Launch a web browser and type
http://wifi.wavlink.com
in the
address field. Enter
(all
admin
lowercase) to login.
If the login window does not
pop up, please refer to the
FAQ>Q1.
Change Login Password
NOTE:
The default login password of the Device is
“admin”
, We
strongly
recommend you change the default login password.
2. Click
“Setup->
Login Password”
.
3. Enter the old password,
then enter the new password
and click
“Apply”
.
For Dual Band (2.4G+5G) User
A11. Choose
a
Security
Type
.
A12. Enter
your
password
for
your
extended
network
.
A11. Choose a
Security
Type
.
A12. Enter your password for your
extended network
.
Note:
Some routers might not be compatible with
WL-WN572HG3. If it doesn't work, please:
a. Click the icon at
Static IP
column to
ON.
b. Enter the info correspondingly.
c. Try again.
Configuration
WAVLINK-N
WPA/WPA2 Mix
WAVLINK-N
WAVLNIK-AC
WPA/WPA2 Mix
ON:
The Ethernet port is connected.
OFF:
The Ethernet port is disconnected.
LAN
5G RP-SMA Antenna Connectors
LAN LED
WAN/LAN Port (POE)
4
3
2
1
7
8
9
5G
2.4G
5
6
Spin 5G antenna into the
5G External RP-SMA
connector
Spin 2.4G antenna into the
2.4G External RP-SMA
connector
Connect the RJ45
cable to RJ45 Port
Pass RJ45 cable through
the holder
Pass RJ45 cable through
the Rubber seal
Pass RJ45 cable through
the spiral cover
Screw the holder
plug the rubber seal to
the holder
Screw the spiral cover
Quick Installation Guide
