- Once in Test Mode, Firmware Version is Displayed
- - Along with Date and Time
- To Enter Program Mode
- - Press the Function Button (Red Dot)…
- - - This takes you to the Password Screen…
- The Pager Default Password is All Zero's (000000)
- - Password can be Edited by using the Arrow Buttons
- The Left / Right Arrows Moves the Cursor Across the Screen
- The Up / Down Arrows Changes the Highlighted Numeric Value
- When Complete, Press the Red Dot Button
- The Pager Frequency:
- - This can be VHF or UHF, Dependent on the Pager
- Must be Entered without a Dot (.)
- - Example: 467800000 is Correct ( But 467.800000 is NOT )
- Frequency is Edited by using the Arrow Buttons...
- The Left / Right Arrows Moves the Cursor Across the Screen
- The Up / Down Arrows Changes the Highlighted Numeric Value
- When Complete, Press the Red Dot Button
- The Pager Baud Rate:
- - This can be: 512 or 1200 or 2400, Dependent on Transmitter
- Baud Rate is Edited by using the Arrow Buttons
- The Left / Right Arrows Moves the Cursor Across the Screen
- The Up / Down Arrows Changes the Highlighted Numeric Value
- When Complete, Press the Red Dot Button
- The Pager Cap Code(s):
- - This is a 7-Digit Numeric Number
- - - This Number is Dependent on the Host System / Transmitter
- - - - Associated with the Pager ID ( Example: 100, 101 and 102)
- Must be Entered with All Leading Zeros Required to Complete
- -Example: If the Pager ID = 101, the Cap Code can be: 0000101
- Baud Rate is Edited by using the Arrow Buttons
- The Left / Right Arrows Moves the Cursor Across the Screen
- The Up / Down Arrows Changes the Highlighted Numeric Value
- If other Cap Codes to Enter, Press Red Dot Button and Repeat
- When Complete, Press the Blue Dot Button to Exit Programming
WaveWare Technologies, Inc.
1.800.373.1466
12.2022
