Wavetronix Click 500 Series, User Manual

Page: 26 / 109

CHAPTER 4
• INSTALLING CLICK SUPERVISOR 25
Figure 4.2 – Selecting an Installation
If you select
Computer
, the program will go through the steps outlined in the next section,
Installing Click Supervisor on a PC. If you select
Pocket PC
, the program will go through
the steps in the section titled Installing Click Supervisor on a handheld computer. If you
select both, the program will go through both installation processes, beginning with install-
ing on the PC.
Note
Although the software can be installed on most handhelds, because of constantly
changing handheld technologies, Wavetronix can only offer technical support on the
handheld in the kit, which is a Socket Mobile 650.
Installing Click Supervisor on a PC
Follow these steps to install Click Supervisor on a PC:
1
On the screen shown in Figure 4.2, click the checkbox labeled
Computer
and then
select
Next > >
.
2
Select an installation location. The default location provided is normally “C:\Program
Files\Wavetronix.” Click
Browse
to choose another location (see Figure 4.3).