WARNING: NEVER UNSCREW OR OPEN THE BATTERY
COMPARTMENT WHILE IN A HAZARDOUS ENVIRONMENT.
1)
Before replacing the battery compartment visually inspect the
gasket to ensure a proper seal.
2)
Once batteries are installed, ensure all four screws are tight,
securing the battery box to the chassis.
WARNING: NEVER UNSCREW OR OPEN THE BATTERY
COMPARTMENT WHILE IN A HAZARDOUS ENVIRONMENT
To change the batteries, unscrew the 4 screws located on the
battery box (the back end of the receiver). Remove the battery
box from the receiver. Do not unscrew the 4 screws located on
the front of the receiver (near the meter) – there are no user
serviceable parts inside. Doing this can void your warranty.
Replace the 8 C cell alkaline (LR14) batteries with fresh batteries
of the same type. Wavetrak recommends using Duracell Procell
PC1400 batteries. Ensure that the batteries are inserted in the
orientation marked on the battery holders, and that all of the
batteries are making contact.
Before replacing the battery box and refastening the 4 screws,
check the condition of the battery box gasket that seals to the
face of the receiver. If it is damaged, the unit will no longer be
weather-tight; contact Wavetrak for a replacement gasket.
