Installation -
Installation
9
1
Detach the camera’s cover dome from the camera’s
module by unscrewing the three cover dome screws
using the L-wrench.
2
Use the camera or mounting template to mark and
drill the necessary holes in the wall or ceiling.
3
Connect the network cable and power cable respectively.
See the section 'Installation - Cabling' for details.
Insert the Lan cable into the rubber first as (a) below.
Put the Lan cable into (b), then (c) will be assembled to
(b) tightly. As a final step, (d) need to be assembled to (c)
without making any space.
4
Using two (2) included screws, mount and secure the
camera to the mounting surface.
5
Secure the camera’s cover dome onto the camera
base to complete the installation.
6
Detach the protection film from the dome cover.
Template Sheet
2
3
4
5
6
b
c
d
a
