13
Installation -
Cabling
1
Power Connection
Please, check the voltage and current capacity of rated
power carefully.
2
Network Connection
Connect the crossover cable into the RJ-45.
3
Audio Output
Connect the ‘Audio Out’ cable of the camera to device like
speaker.
Audio Out supports only RTSP Back channel function.
It plans to make it available on the web later.
4
Audio Input
Connect the ‘Audio In’ cable of the camera to the device
like microphone.
5
Alarm Output
It connects to the alarm lights, siren or lamps, and it is
activated according to the Setup menu setting.
Cable of the relay output device should connect to sky blue
and gray+dot line of the Alarm Cable.
6
Alarm Input/Sensor
Cable of the sensor/alarm input device should connect to
yellow and white line of the Alarm Cable.
1
Power
2
Network
3
Audio Output
4
Audio Input
5
Alarm Output
6
Alarm Input
4
~
5
Alarm In/Out
Rate Power
Power
Consumption
PoE
DC 12V
8.5W
IEEE 802.3af class3
DI (+)
WHITE
DI (-)
YELLOW
DO (-)
SKY BLUE
DO (+)
GRAY + DOT
