Copyright © 2020 Wavesplitter AV Technology
|
Wavesplitter .com
TEL
：
1-510-0651-7800
：
OPERATION MANUAL
Note:
Note. The Transmitter has default and copy EDID function (2 PIN EDID switch), the table list is as below.
Up dial stands for 0, down dial stands for 1, different digits combination has different EDID effect
Connecting and operating
1.
Connect 1 source such as a Blu-Ray Player, game console, STB, etc. to the HDMI input on the transmitter
．
2.
Connect 1 display such as an HDTV or HD Projector to the Loop HDMI output on the transmitter.
3.
Connect 1 display such as an HDTV or HD Projector to the HDMI output on the receiver
．
4.
Connect a single Category 6 or above up to (70m) to both transmitter and receiver.
5.
Plug in the IR-RX cable and IR-TX cable to the IR jack port located on the Receiver and transmitter banal.
6.
Power on the transmitter firstly, then power on the source and sink.
Applications
00
4K60/420/2CH
01 Copy Far-end EDID
10
Copy Loop-out EDID
11
4K60/444/5.1CH
