RS485 TO ETH
3.
PARAMETER SETTING
There are three ways to configure RS485 TO ETH. They are setup software configuration, web server
configuration and AT command configuration.
3.1.
SETUP SOFTWARE CONFIG URATION
User can download setup software from
. When user want to configure the RS485 TO
ETH by setup software, user can run setup software, search RS485 TO ETH in same LAN and configure
the RS485 TO ETH as follow:
After researching RS485 TO ETH and clicking RS485 TO ETH to configure, user need log in with user
name and password. Default user name and password both are admin. If user keep the default
parameters, it is not necessary to log in.
Figure 20 Setup Software