Pico-BLE User manual
版本：
V1.0
，日期：
2021
年
12
月
16
日
8 / 10
Serial number
Current
Description
AT+CL00\r\n
Low power
working mode
Boot moment
12mA
When the chip is powered on, the peripherals
need to be initialized. The instantaneous
current is relatively large, and this time
is maintained for 300ms, and it enters a
low-power state.
Working Status - Not
Connected
1mA, 5mA
alternately
The chip is in normal working state,
broadcasts normally, and is in a periodic
state of sleep, wake-up broadcast, and
sleep. The purpose is to save power
consumption, the cycle is 500ms. 100ms
broadcast once, 400ms sleep
Working status - to connect
6mA
When the connection is successful, the chip
will no longer go to sleep. but at work
AT+CL01\r\n
normal
working mode
Boot moment
25mA
When the chip is powered on, the peripherals
need to be initialized. The instantaneous
current is relatively large, this time is
maintained for 300ms, and it enters the 5mA
working state
Whether connected or not
6.5mA
The chip is always working. Small
fluctuations in current, negligible
If you feel that the above power consumption is relatively high, you can use 3.3V to directly supply
power to the module, and the current will further
