Waveshare E9 User Manual Download Page 41

Page: 41 / 95

Waveshare Electronics

Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China

TEL: +86-755-83040832 Web: http://www.wvshare.com/

FAX: 86-755-83042572 E-mail:

[email protected]



Copy the file

Uboot Image

Copy u-boot.bin to

Mfgtools-Rel-1.1.0_121218_MX6Q_UPDATER\Profiles\MX6Q Linux Update\OS

Firmware\files\ubuntu (Or replace an existing file)

Kernel Image

Copy uImage to

Mfgtools-Rel-1.1.0_121218_MX6Q_UPDATER\ Profiles\MX6Q Linux Update\OS

Firmware\files\ubuntu (Or replace an existing file)

File System Image

Copy oneiric.tgz to

Mfgtools-Rel-1.1.0_121218_MX6Q_UPDATER\Profiles\MX6Q Linux Update\OS

Firmware\files\ubuntu (Or replace an existing file)

Note: After copy the files; please change the “u-boot_E9_for-ubuntu_v2.0.bin” to “u-boot.bin”, delete

“_E9_for-ubuntu_v2.0”, and so ad the “uImage” and “oneiric.tgz”.

After

done,

the

file

structure

under

the

Summary of Contents for E9
































































































Search results

Summary of Contents for E9

Reviews:

Brands by name

Popular brands

Waveshare E9, User Manual

Search results

Summary of Contents for E9

Reviews:

Brands by name

Popular brands