39 / 69
GS1-128
ON/OFF
CODE READING LENGTH
Scan the following barcodes to change the read length. For additional information, refer to the
Code Reading Length instructions. The minimum and maximum lengths are 1-80. The minimum
default value = 1 and the maximum default value = 80. (Note: After scanning the “Minimum
barcode length” and “Maximum barcode length”, you will also need to scan the specified barcode
length and save the barcode, see the Read Length instructions.)
UPC-A
All Default GS1-128 Settings
*On
Off
Minimum Barcode Length
Maximum Barcode Length
All Default UPC-A Settings
