WSG-Y16 Interface Card / User Guide
11
The following example shows how to set up the dipswitches. Slide the dipswitches toward the “ON” marking to turn them
on; slide them in the opposite direction to turn them off.
The dipswitches provide the following functionality:
OFF
ON
DIP 1
Selects 44.1/48 kHz mode
(applicable in Emulation mode
only)
Selects 88.2/96 kHz mode
(applicable in Emulation mode only)
DIP 2
Emulation mode
Native mode
DIP 3
Normal operation of the card
Forces the card into firmware update mode
DIP 4
N/A
N/A
Notes: Native mode can only be used with mixing consoles that support such a mode; please refer to the console
manual. When in Native mode, the card will auto-detect the frequency—DIP 1 is ignored. When in doubt, use Emulation
mode.