Waves HPSA-7100-R Series, Installation And User Manual

Page: 140 / 179

Troubleshooting the HPSA-7100-R
114 HPSA-7100-R Series Installation and User Manual
P/N P01-04946 Rev C
9.4 AMB LED STATUS AND TROUBLE INDICATORS
Table 9.6, “AMB Status and Trouble LED Indicators*” provides a description of the
Status and Trouble LEDs located on the Audio and Monitoring Bridge (AMB) shown
below in Figure 9.12
FIGURE 9.12 Audio and Monitoring Bridge Connection Points
TABLE 9.6
AMB Status and Trouble LED Indicators*
* Verify the Jumper settings on the AMB match correctly with the No/NCJ2 input connections on J2
LED
Normal Operating
Condition Trouble Condition
D11 No AC OFF On when no AC is present
D12 No Battery OFF On at approx. <16 VDC
D13 Low Battery OFF On at approx. <46 VDC
D14 Door Open (Tamper) OFF On when door open
D15 Low Amplifier Voltage OFF On at approx. <13.8 VDC
D16 Drivers Open or Shorted OFF
On when Driver circuit is
Open or Shorted
AC NO
BATT LOW
BATT AMP DVR N/A N/A
g
J5
TAMPER