Waves HPSA-7100-R Series, Installation And User Manual

Page: 115 / 179

HPSA-7100-R Series Installation and User Manual 89
P/N P01- 04946 Rev C
Working with the HPSA-7100-R
8.1.3 Stored Alarms/Tones On the HPSA-7100-R Control Panel
There are several alarms/tones built into the HPSA-7100-R that can be selected from the
Control Panel. A list of the available alarms/tones is provided in Table 8.1.
TABLE 8.1
Alarm Tones
Alarm 1 Tone Frequency Sweep Amplitude
1 400 Hz -850 Hz 5.5s/5.5s Constant
2
570 Hz - 1020
Hz
5.5s/5.5s Constant
Alarm 2 Tone Frequency Sweep Amplitutde
1 400 Hz -850 Hz 5.5s/5.5s 1s ON/1s OFF
2
570 Hz - 1020
Hz
5.5s/5.5s 1s ON/1s OFF
Alarm 3 Tone Frequency Sweep Amplitude
1 400 Hz -850 Hz 5.5s/5.5s 1s ON/1s OFF
2
570 Hz - 1020
Hz
5.5s/5.5s 1s OFF/1s ON
Alarm 4 Tone Frequency Sweep Amplitude
1 850 Hz
Ramp Up/Ramp
Down
Constant
2 1020 Hz
Ramp Up/Ramp
Down
Constant
Alarm 5 Tone Frequency Sweep Amplitude
1 850 Hz
Ramp Up/Ramp
down
1s ON/1s OFF
2 1020 Hz
Ramp Up/Ramp
Down
1s ON/1s OFF
Alarm 6 Tone Frequency Sweep Amplitude
1 1000 Hz Constant Constant
Alarm 7 Tone Frequency Sweep Amplitude
1 250 Hz Constant Constant
Alarm 8 Tone Frequency Sweep Amplitude
1 420 Hz Constant Constant
Alarm 9 Tone Frequency Sweep Amplitude
1 460 Hz Constant Constant
Several default Alarm Tones are built into the HPSA and can be played from
the Control Panel. Additional tones and messages can be recorded, stored,
and played from the WAVES Base Station.