Waves CA2000 / User Guide
9
Routing Dante Channels to CA2000 SuperRack Channels
Now you’re ready to route the Dante channels in SuperRack. A rack must be routed to an input and an output Dante
channel. Rack input and output routing is done in the SuperRack Rack window or Overview window. In the following
example, we will route rack input from a Dante channel to a single rack in the Rack window. Use the tab at the top to
open the Rack window.
S
UPER
R
ACK
C
HANNEL
A
SSIGNMENT
Select a rack.
Click on the Input arrow. This opens the Input
Device Assignment menu.
Select an input format (e.g., mono, Stereo, 5.0).
Select an input audio channel. Note that
channels are displayed in the “Dante Virtual
Soundcard.”
Rack outputs are routed in the same manner.
Confirm the routing in the Dante Controller for the network devices that will be connected to and from the CA2000.
