Waves CA1000 / User Guide
5
Setup Guide
Follow these steps to prepare the CA1000 for operation in an AV installation with an ASIO interface or Dante
network audio.
H
ARDWARE
C
ONNECTIONS
1. Connect the power cables to mains. For the computer and all devices, use the enclosed power cables.
2. Connect the keyboard and mouse (used for CA1000 setup and configuration).
3. Connect up to two displays to the HDMI ports.
4. Connecting the CA1000 to a Dante network: Connect one of the LAN Ethernet ports to the switch on the
Dante audio network. The right-most RJ45 connector is the factory-configured Dante network port. Port
assignment can be changed in the Dante Virtual Soundcard (DVS) configuration window.
Note: DVS is configured at the factory as the selected Audio Device in the SuperRack Setup tab.
5. Connecting the CA1000 to an ASIO interface: Connect the ASIO interface to one of the USB connectors on
the CA1000. Follow instructions provided by the interface manufacturer to install and configure the ASIO
driver on the CA1000.
Note: DVS is configured at the factory as the selected Audio Device in the SuperRack setup tab. If using an
ASIO device, the corresponding device driver must be selected after installing the ASIO interface.
W
AVES
CA1000
S
OFTWARE
The Waves CA1000 comes with the software activated and is ready to use. The following applications are
included with the Waves CA1000 system:
•
Waves SuperRack
•
Audinate Dante Virtual Soundcard (DVS)
Waves plugins that are used in the Waves CA preset library are installed and activated on the CA1000.
It is also possible to download the CA1000 software and plugins using your own Waves account. Follow these
steps to transfer the pre-activated licenses to your account:
