5
1. Power Led
2. Internet Port Led
3. 2.4GHz Wireless Interface Led
4. 5GHz Wireless Interface Led
5. Guest Ethernet Port Led
6. RGB Side Led
7. Logo Led
8. DC Power Jack
9. ON/OFF Switch
10. Reset to Factory Button
11. 2.4GHz Interface Button
12. 5GHz Interface Button
13. Internet Ethernet Port
14. LAN Ethernet Ports
15. Guest Ethernet Port
(N Series only - with PoE Out 24V)
8
9
10 11 12
13
14
15
Hardware Installation
To install the Waver SmartOne router, perform the following
steps:
1.
Connect Ethernet cable from you DSL/Cable modem to
the INTERNET Port of Waver SmartOne Router.
2.
Connect the DC Power Adapter to the router and to a
power outlet.
3.
Turn on router by pressing the ON/OFF switch to ON position.