© 2001, 2003, 2009
WLD3393
PAGE 3
WLD3393-00400-A Rev F
CONFIGURING THE DEMO BOARD
STEP 1: INSTALL the WLD3343 on the demo board
Match up the notch in the WLD3343 with the index marker shown in Figure 3. Align the WLD3343 pins
with the WLD3393 sockets ensuring that all pins are lined up. Press fi rmly to seat the WLD3343.
Make
sure that none of the pins of the WLD3343 were bent during insertion before continuing.
SETUP INFORMATION
To set up the WLD for your project, you’ll need a few pieces of information. Here’s a handy list of what
you’ll need to know before you start wiring [it’s also good to have this information if you need to call for
technical support].
Description
Laser Diode Confi guration
Laser Diode Max Current
Operating LD Current
Operating PD Current
Operating Mode
Power Supply Voltage
Value in your
application
A B
or
C
CP
or
CC
Notes
See Figure 4 for schematics. If you have no photodiode, follow instructions for
Type A laser diodes.
If greater than 200mA, make sure to check the SOA curve in the WLD3343
datasheet and use a Thermal Solutions kit (Fan, Heatsink, and Thermal
Washer) or equivalent
Constant Current: Laser diode current is fi xed, power varies.
Constant Power: Laser diode current varies. Photodiode current is fi xed.
Power output is fi xed.
If greater than 5V, make sure to check the SOA curve in the WLD3343
datasheet and use a Thermal Solutions kit (Fan, Heatsink, and Thermal
Washer) or equivalent. An online tool for calculating the WLD3343 Safe
Operating Area is available at:
http://www.teamwavelength.com/support/calculator/soa/soald.php
Follow the next ten steps sequentially to safely operate the WLD with your laser
diode. Complete steps 1 through 4 before applying power to the board.
A/B
T
YPE
CC
SET
WLD3343
P MON
I MON
COM
PGND
VDD
PDC
PDA
LDC
LDA
WAVELENGTH
WLD3393
ELECTRONICS
ONLY
0N
(-)
(+)
FAN
PMON
SET
2.5
PDM
CP
COM
LIM
WITH
ENABLE
VS
IMON
OFF
C
USE
1
Index Marker
WLD3393
Sockets
Figure 3: Location of Index Marker and sockets; Standoff assembly
4-40 x 0.625” NYLON
STANDOFFS
4 REQUIRED
