128
54
Fill Water Tank
Step 6 - Fill Water Tank
Fill Water Tank -
Identify Water Tank Plug (54) and Siphon Pump (128). Remove the
Fill Plug
from the Water Tank. Attach the Siphon Pump to a jug of
water. Position the jug of water higher than the Water Plug opening.
Pump the Siphon several times until water begins to flow into the
Water Tank to measure desired water level in the tank. Replace the
Fill Plug. Wipe off any excess water.
Water Level -
The water level gauge is on the side of the tank. Never fill it over the
maximum limit. Filling the tank over this limit will void the warranty.
Empty Water Tank -
Remove Water Tank Plug (73). Place Siphon hose into Water Tank
and the other end into a water jug placed on the floor. Pump the
siphon several times until water flows from the Water Tank to the
water jug.
NOTE
Fill the tank only with distilled water. Never use pool chlorine or
chlorine bleach, this will damage the tank and void the warranty. Do
not consume the tank water. Dispose the water after pumping it out
from the tank.
12
