Assembly Instructions
STEP 1 - Attach Stabilizers
Attach Front Stabilizer -
Identify Front Stabilizer (86) and position it under the Mainframe (62) as
shown. Attach the front stabilizer to the frame using the hex wrench (83)
with two
M8 bolts (44), two M8
spring washers (94), and two M8 flat
washers (3). Place a spring washer on a bolt followed by a flat washer.
Using the hex wrench attach the front stabilizer to the mainframe by
tightening the bolt until secure. Repeat for the other Front Stabilizer hole.
Finally, check to see that both bolts are tightened securely.
Attach Rear Stabilizer -
Identify Rear Stabilizer (92) and position it under the Mainframe (62) as
shown. Attach the rear stabilizer to the frame using the hex wrench (83)
with two
M8 bolts (44), two M8
spring washers (94), and two M8 flat
washers (3). Place a spring washer on a bolt followed by a flat washer.
Using the hex wrench attach the rear stabilizer to the mainframe by
tightening the bolt until secure. Repeat for the other Rear Stabilizer hole.
Finally, check to see that both bolts are tightened securely.
8
