![background image](http://html1.mh-extra.com/html/wavee/w-1/w-1_quick-start-manual_3814196004.webp)
Get Started
Assembly
1. Position the brush head with the bristles facing forward and aligned with
the brush's LED lights.
2. Gently press the head straight down until you hear a slight click. There
should be a small gap between the head and handle when attached correctly.
Charging the Brush
1. Place the brush handle inside the speaker's charging cradle with the power
button facing you. The brush's LED lights will light up individually from the
bottom to top to confirm charging. A slow flashing red light indicates charging.
A solid white lightindicates a fully charged battery.
2. For optimal performance, it is recommended to always charge the toothbrush
while the speaker is connected to a USB power source.
Charging the Speaker
1. Connect the USB power cable to the power adaptor and then plug into a
power outlet.
2. Connect the other end of the USB cable to the speaker's input located on its
underside.
3. The LED light will flash white for 10 seconds to confirm charging.
Summary of Contents for W-1
Page 1: ...Quick Start Guide Toothbrush Speaker System Model W 1...
Page 2: ......