Proxy Mode
In Proxy mode, traffic is sent to CyBlock Appliance as proxy requests. CyBlock
Appliance then determines if the request should be blocked or allowed based on your
filtering policies. Connect the appliance similar to your computer. Using an Ethernet
cable, plug the NIC4 LAN port on the appliance into a network Hub.
Figure 7: Appliance in Proxy Mode
For more information and technical specifications, see our
CyBlock Appliance
Datasheet
.
What’s Next?
The CyBlock Appliance client software can be installed for protocol authentication,
which can be done centrally. By default, the appliance allows for local reporting,
but you have the option to install and configure Cyfin for remote reporting. These
instructions are located in the product manual. Access the product manual from the
CyBlock Appliance interface by going to
Help - User Guide
.
Wavecrest Computing, Inc.
904 East New Haven Avenue
Melbourne, FL 32901 USA
Visit our knowledge base at kb.wavecrest.net.
Toll-Free:
877-442-9346 (U.S. & Canada)
Direct:
321-953-5351, Ext. 4
International: 001-321-953-5351 (outside U.S. & Canada)
E-Mail:
