1.
WARNINGS AND PRECAUTIONS
Review this manual and become familiar with all the instructions for using
and handling your
SMP2
.
Your
SMP2
is a portable apparatus with a rechargeable battery. Before
taking any measurement, make sure that the battery is sufficiently charged
for the time that you need for the measurement. If it is not, recharge the
battery before.
Your
SMP2
is not watertight and it should be protected from moisture, such
as rain.
Adjustment, maintenance or repair of the equipment must be performed
only by qualified personnel. Please get in touch with
Wavecontrol
or your
sales contact.
Never overtighten when screwing the
SMP2
on the tripod since the thread
engagement could break down.
The
SMP2
is a professional measurement device that must be calibrated to
ensure that it works properly. Check to make sure that its calibration is valid at
all times.
If your equipment has been calibrated according to ISO 17025, the calibration
report is valid only for the
SMP2
and probe. The probe can, however, be used
with any other
SMP2
. The calibration report will not be valid if you switch the
probe.
If you are unsure or need to recalibrate, please contact your distributor or
contact us at [email protected] (see section 10.3).
User’s Manual
Electromagnetic Field Meter SMP2
P.
4
Summary of Contents for SMP2
