11
TnT Titan
User Manual
Wavecom
WinPATS will scan for any available TnT or TnP testers and display them in a list - select your tester from the
list by tapping it. If you see multiple TnT or TnP products in the list,
use the serial number of your TnT Titan to
identify your tester.
You will now be asked to register your TnT Titan - this allows you to receive product support, service and
calibration reminders from Wavecom. Once complete, tap Register. You’re now ready to start testing with
WinPATS!
Connecting via USB
You can also connect to your TnT Titan via USB if needed. Follow the following diagrams to connect your TnT
Titan to your tablet or PC, with or without your printer. Please note that you need to connect your printer in
addition to your TnT Titan as shown.
Connecting your TnT Titan to your Tablet via USB
To connect your TnT Titan to your tablet via USB, you will need:
• A USB-A to USB-B cable (Included)
• A Micro-USB to USB-A cable (Included)
• A USB Hub or USB Splitter cable
• A USB-OTG Cable (Included)
Connect your cables in the sequence shown below. Your TnT Titan USB-B port is located inside the storage
compartment, and the Printer USB-B port is located at the rear of the printer. Once connected, open WinPATS
on your tablet. You should see the Test icon and the Print icon (if you connect the printer) at the top of the
screen change to green.
Connecting your TnT Titan to your PC via USB
To connect your TnT Titan to your PC via USB, you will need:
• A USB-A to USB-B cable (Included)
• A Micro-USB to USB-A cable (Included)
• A USB Hub or USB Splitter cable
WinPATS
USB-OTG Cable
Micro USB
Tablet
USB Hub or
Splitter Cable
USB-B to
USB-A Cable
Micro USB to
USB A Cable
USB-B
USB-A
USB-A
Micro USB
