Product Support
Safety Information
Important Calibration Information
At Wavecom we take great pride in our customer service and support. We provide assistance,
troubleshooting and support over the phone, via Skype or Facetime, via email or in person to help
you get the most from your Wavecom Portable Appliance Tester. To be eligible for our support
services you must register your product.
You can register via the WinPATS App (this is done automatically during the setup process), or
online at:
https://www.wavecom.com.au/wcm_product_registration.php
The TnT RCD has been designed to meet stringent safety requirements, however no device can
completely protect you from the consequences of incorrect use. The testing of electrical appliances
requires that extra care and caution is taken at all times to ensure personal safety.
The Manufacturer also advises that appliance testing should be conducted by a
Competent Person
who is suitably trained (see P.5 AS/NZ 3760:2010 for the definition of
Competent Person
), as well as
any additional legislation or rulings in different states. If in doubt, the manufacturer suggests the
user contact their responsible authority.
For maximum safety, always ensure that the following advice is followed:
• The equipment being tested is in good condition and passes a visual check.
• All instructions are read, understood and followed.
• The power supply connections are always checked - if the N-E (middle) LED Indicator flashes
red, do not proceed before consulting the manual.
• Always use specified fuses and protection devices.
• Do not use leads that require repair or are damaged.
• If you are unsure, call a licensed Engineer/Electrician.
Your Wavecom Appliance Tester should be calibrated every 12 months. A correctly calibrated
tester is essential for ensuring testing accuracy is maintained, and for complying with the AS/NZS
3760:2010.
To book your tester in for calibration, go to:
https://www.wavecom.com.au/calibration_services.php
Then, send your tester to your nearest calibration service centre:
For Western Australian customers:
Wavecom WA Calibrations
Unit 2/17 Casino Street,
Welshpool, WA 6016
For all other customers:
Wavecom Calibrations
257 Grange Road,
Findon, SA 5023
Wavecom Certificate
of Warranty
Your Wavecom Appliance Tester comes with a
conditional 24 month warranty.
Your warranty applies for 12 months from the date of purchase, and will
be extended an additional 12 months if your Tester is calibrated within 12
months of the date of purchase (see rear cover of this manual).
The Manufacturer (Wavecom Instruments Pty. Ltd.) warrants its products against defects in materials and
workmanship for a period of 12 months from the date of purchase. During the warranty period, the Manufacturer
will repair (or at its option replace at no charge) the product that proves to be defective. This warranty does not
apply if the product has been damaged by accident, abuse, misuse or mis-application or as a result of service
or modification by anyone other than the Manufacturer of this tester.
The TnT & TnP Product Range of devices or its Manufacturer is not responsible for incidental or consequential
damages resulting from the breach of any express or implied warranty, including damage to property and to the
extent permitted by law, damages for personal injury. The distributors of this product cannot assume liability
or responsibility for any loss of damage resulting from the use of this device.
The Manufacturer reserves the right to discontinue models, change specifications, price or designs at any time
without notice or obligation.
