Integra M2106+
Erreur ! Style non défini.
©Confidential
Page: 50 / 77
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without prior written
agreement.
WA_DE_PTS_003-001
April, 2007
4.3
Electrical Specifications
4.3.1
Power Mode
The Integra M2106+ Wireless CPU
®
supports different power consumption modes:
Working modes
Comments
OFF mode
The Wireless CPU
®
is in OFF mode.
FAST idle mode
The Wireless CPU
®
is synchronized with an RF GSM/GPRS network.
The internal 26 MHz of the Wireless CPU
®
is constantly active.
SLOW idle mode
The Wireless CPU
®
is synchronized with an RF GSM/GPRS tester.
The internal 26 MHz of the Wireless CPU
®
is not constantly active.
FAST Standby mode
The SIM and Radio interface are deactivated via AT command or Open AT API:
-The embedded application is running
-The serial port remains active (AT commands are available).
The internal 26 MHz of the Wireless CPU
®
is constantly active.
SLOW Standby mode
This mode is similar to the FAST Standby mode.
All the features are disabled (no GSM, no GPRS, no SIM and no Serial port).
The internal 26 MHz of the Wireless CPU
®
is not constantly active.
Communication
mode
A GSM/GPRS communication is established with a RF GSM/GPRS network.
The power consumption depends on the configuration used. It is for this reason that the following power
consumption values are given for each modes,
RF bands and software used (AT or Open AT
®
).
All the following information is given, by assuming a
50
Ω
RF output.
5.0 VDC power supply value is used to measure the consumption.
For more information on power consumption measurement, hardware configuration, SIM used, and software
Dhrystone application, see the AT command Interface Guide documentation [7].
