Wave wifi MNC Series, Quick Start Manual

Page: 2 / 2

MNC Series 1200/1250
QUICK START
GUIDE
How to login wirelessly:
1. Connect the MNC unit to power, leave ethernet connections unplugged for now.
2. On your wireless device (smartphone, tablet, or computer) turn on WiFi and look for the Wave WiFi
Access Point, select it as your WiFi source & enter the password. (It is the S/N number on back of the router)
i.e. CSN-11111
3. Once you are connected, open a browser page and type in 192.168.101.1 which provides you access to
the router status page. You are now on the GUI (Graphic User Interface) with access to all the functions
and features of the router. (Proceed to step 5.)
To login via ethernet cable:
4. Connect Laptop/PC or Mac via an ethernet cable to the Main LAN (BLUE PORT)
5. If you have a Wave WIFI receiver plug in the power to the POE adapter and then plug the male end of theadapter into the YELLOW PORT
#2. It may take a few minutes till it appears green. The female adapter end should be connected by ethernet cable to the Wifi Receiver.
(Picture bottom right).
6. Click on the word “Manage” to access the Scan page of the Wave WiFi receiver.
The ports above are displayed as shown left to right from the
back of the router, followed by any mobile data interfaces as
virtual ports (the built-in sim slot and/or attached via the USB
port). On the UI, a WAN port showing a plug inserted confi rms
the WAN port recognizes attachment. The MAIN LAN will al-
ways show a virtual plug confi rming a device is connected to
the router either by ethernet or wirelessly. A green background
indicates that that WAN port is the active Internet source. A
built in Manual can be accessed anywhere you see the circle
with the ? or a book icon.
4828 Ne 12th Avenue, Oakland Park, Florida 33334-4804 • 1.954.928.1310 • support@wavewifi .com