1 HD aluminum extruded hood HTR Technology
3.5 w HO LED’s
GFCI plug & power cord
Right side endcap
Wire connection e-39
Hanging Kits
Wire lock nut e-39
16x Screw 3.5/8
Left side endcap
Endcap
Plastic splash guard
2
4
5
6
7
8
9
10
11
3
DRIP
LOOP
GFCI
ONLY
AVAILABLE MODEL:
BlueStar™ Daylight HO LED Lighting System with Dual AC Cords: Each foot of the light hood consists of three strips of eight 3.5 watt LED lamps.
Outside strips: 4 white & 4 blue. Inside strip: 8 blue. Total of 84 watt per foot.
MODEL #
DESCRIPTION
DIMENSION (APPROX.)
01046
12in 84 watt 8 white & 16 blue 3.5 watt LED lamps
9.25 x 2.75 x 12.25in
01026
24in 168 watt 16 white & 32 blue 3.5 watt LED lamps
9.25 x 2.75 x 23.75in
01027
36in 252 watt 24 white & 48 blue 3.5 watt LED lamps
9.25 x 2.75 x 35.25in
01028
48in 336 watt 36 white & 72 blue 3.5 watt LED lamps
9.25 x 2.75 x 46.75in
DayStar™ Daylight HO LED Lighting System with Single AC Cord: Each foot of the light hood consists of three strip of eight 3.5 watt LED lamps. All
strips: 4 white & 4 blue. Total of 84 watt per foot.
MODEL #
DESCRIPTION
DIMENSION (APPROX.)
01087
12in 84 watt, 12 white & 12 blue 3.5 watt LED lamps
9.25 x 2.75 x 12.25in
01088
24in 168 watt 24 white & 24 blue 3.5 watt LED lamps
9.25 x 2.75 x 23.75in
01089
36in 252 watt 36 white & 36 blue 3.5 watt LED lamps
9.25 x 2.75 x 35.25in
01090
48in 336 watt 48 white & 48 blue 3.5 watt LED lamps
9.25 x 2.75 x 46.75in
REPLACEMENT PART
MODEL #
DESCRIPTION
01095
Hanging Kit for HO LED lighting system
01092
Wave Point® light stand mount (optional part, not included)
CAUTION:
When upgrading lights from an existing aquarium certain precautions need to be taken. When changing any lighting on an
established aquarium there will be a variance of light intensity and or color temperature of lighting and animals will take
time to adjust. It may be necessary to raise the light, reduce light cycle and even change the position of corals/animals.
Always consult with your local fish store for proper procedures when changing lighting from an existing aquarium.
PAGE 1
IMPORTANT WARNING AND SAFEGUARDS
Read and follow the guidelines to ensure the proper
use and application. Failure to follow these guidelines
may result in light fixture damage, electrical shock,
fire and/or injury.
1. Use this product for its intended use only.
2. Never yank or pull the cord from the electrical outlet.
3.
Do not place the light fixture directly on top of the aquarium without
using the hanging kit
4. Do not operate if the plug or wire is damaged.
5.
The light fixture is not to come in contact with water.
6.
The light fixture must be turned off/disconnected from the power
supply before any maintenance is done to either the light fixture or
the aquarium.
7. Verify that hands are dry prior to disconnecting the power.
8. To reduce the risk of electrocution keep all connections dry.
9.
If the light fixture falls or comes in contact with water/excess moisture,
unplug the light fixture from the power supply immediately before
removing. Failure to do so may cause electrical shock or injury.
10.
The light fixture and connections need to be free of water, moisture
and salt build up at all times. Failure to do so will cause electrical
arching resulting in possible fire or electrical shock.
11.
Do not place above an open top aquarium.
This product may contain chemicals known to the state of California
to cause cancer and or birth defects or other reproductive harm.
Wash your hand after handling this product.
It is your sole responsibilitiy to verify that the plug and the
receptacle are clean and free of moisture and salt build up at
all times. The receptacle must be free of water, salt, calcium,
magnesium and dust. Failure to do so can cause fire, damage to
property, permanent damage to the product and personal injury not
limited to loss of life.
Do not plug into extension cord/power strip.
Hg lamp contains Mercury
Manage in accordance with disposal laws
See: www.lamprecycle.org
A drip loop must be used when plugging
all electrical aquarium devices. A drip
loop is that part of the cord hanging
below the receptacle.
The national code requires that a GFCI
(Ground fault circuit interrupter) be used
in the branch circuit supplying all power
to water pumps and electrical aquarium
equipment. If you do not have a GFCI,
have an electrician install one prior to
operating any aquarium component.
PART LIST
1.
HD aluminum extruded hood HTR Technology
2.
3.5 w HO LED’s
3.
Plastic splash guard
4.
GFCI plug and power cord
5.
Right side endcap
6.
Left side endcap
7.
Endcap
8.
Wire connection e-39
9.
Wire lock nut e-39
10.
16x Screw 3.5/8
11.
Hanging Kits
