4
7)
Place the bar top pieces in place by aligning all seams starting at the front center where the bar
splits into two pieces.
*Make sure to fit up before adding exterior construction adhesive and
finish nails.*
Once all pieces have been fit up, apply adhesive and nail all bar top pieces in place.
Figure 7
8)
Align and screw interior shelves (from Step 5) into place using 2” screws(Bag #3).
9)
Screw the front face pieces of plywood onto the leg assemblies as shown in Figure 8 below using
2” screws(Bag #3). Predrill 1/8” holes in the pattern shown below (red dots) in Figure 8.
Figure 8
