
BOAT MAINTENANCE
TOWING
13
1.
Wash
the boat with clean water, taking special care to remove sand or small stones that could
have slid between the buoyancy mechanism and the GRP hull.
2.
Drain
all water, all sand and all stones from the boat, by opening the plug hole cap and allow to
dry.
3.
Store
the boat with the buoyancy mechanisms
slightly inflated. If this is not possible, it is
recommended that the buoyancy mechanisms
should be folded in the glass fibre section of the hull
and should be attached without tightening them.
4.
Maintain
the motor according to the manufacturer's
recommendations.
It is important to store the boat where it is protected from rodents
NOTE
1. Reinforced aft
lifting rings (two).
2. Reinforced bow
lifting rings (two).
2
1
Summary of Contents for SportLine 480
Page 19: ...1 1 WARNING ...