Waukesha Cherry-Burrell
Introduction
Issued: January 2003
95-03074
Page 7
Revised: June 2005
Introduction
Manual Content
Maintenance procedures in this manual do not cover aseptic or high pressure pump applications. These are covered in
special addendums available from your Waukesha Cherry-Burrell representative.
Receiving Your Pump
All ports are covered at the factory to keep out foreign objects during transit. If covers are missing or damaged, remove
the pump cover for a thorough inspection of fluid head. Be sure pumping head is clean and free of foreign material before
rotating shaft.
Each Waukesha pump is shipped completely assembled, lubricated and ready for use. Review “Operation” on page 13
before operating your pump.
Figure 1 - Common Part Identification
1. Plug Inspection
8. Impeller
14. Cap Screws
2. O-Ring
9. O-ring
15. Lock Washers
3. Casing
10. Backplate
16. Motor Adapter
4. Impeller Retainer
11. Flat Washers
17. Seals (details shown on page 22)
5. Spring Nut (2065LR) /
Belleville Washer (2085LR)
12. Backplate Cap Screws
18. Key
6. Spacer Nut (2065LR) /
Shim Washers (2085LR)
13. Clamp
22. Motor Shims
7. O-ring
NOTE:
Reorder information is available on page 24.
