LIGHTS
To activate the lights press the on/off button quickly. The display should light up and a little icon
appear above the PAS level indicator.. To turn off press repeat how you turned it on.
BATTERY DISPLAY CAPCITY
The LCD readout on the handlebar of your Bighorn Bike features a battery capacity gauge (much like
the fuel gauge on an automobile). Once the battery is fully depleted, the last remaining bar will
begin to flash, communicating to the user that they should cease operation immediately.
THROTTLE
The Throttle is located on the left-hand side of the handlebars in the form of a thumb piece. Please
be careful that these throttles are set to operate the Bighorn from stationary so any slight press of
this will propel the Bighorn forward. The throttle can be used when taking off from a stationary
start, as a cruise control or just if you’re in need of a break
! Please be aware using the throttle will
drain the battery much quicker than normal riding. Also, the throttle is not designed to climb steep
hills. To get the maximum amount of power from the Bighorn on steep gradients select the highest
level of PAS and use the highest gear.
PAS (Pedal assist modes)
Pedal assist modes start from 1 and go up to 5 in some cases. This can be changed if required. Refer
to the Display manual. PAS level 1 is the first pedal assist level and will give you some slight
assistance. The rider however will still be doing most of the work. As you select the higher levels, the
assistance will increase with level 9 basically doing all the work for you. Using higher levels of PAS
will drain the battery faster. The recommended level is PAS 2-3 to ensure maximum battery life.
With these displays you have the option of programming the power level on each PAS level.
BRAKES
