background image

Wattstopper

 

®

DLM - Occupancy Sensor PIR Corner Mount With One-Way Aisle Lens

Installation Instructions • Instructions d’Installation • Instrucciones de Instalación

No: 24782 – 09/16  rev. 1

Catalog Number • Numéro de Catalogue • Número de Catálogo: LMPX-100-4

Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China

LMPX-100-4-U is BAA and TAA compliant (Product produced in the U.S.)

SPECIFICATIONS

Voltage .............................................................................. 24VDC
Current Consumption .............................................................7mA
Power Supply ................................Wattstopper Room Controllers
Connection to the DLM Local Network ........................ RJ-45 plug
DLM Local Network characteristics when using LMRC-11x/2xx 

room controllers:
 

Low voltage power provided over Cat 5e cable (LMRJ);  

 

max current 800mA. Supports up to 64 load addresses,  

 

48 communicating devices including up to 4 LMRC-10x  

 

series and/or LMPL-101 controllers.  

 

Free topology up to 1,000’ max.

Environment ................................................. For Indoor Use Only
 

Operating Temperature .................32° to 131°F (0° to 55°C)

 

Storage Temperature ...................23° to 176°F (-5° to 80°C)

 

Relative Humidity .......................5 to 95% (non condensing)

Patent Pending

This unit is pre-set for Plug n’ Go™ operation, adjustment is 

optional.

For full operational details, adjustment and more features of the product, see the 

DLM System Installation Guide provided with Wattstopper room controllers, and 

also available at www.legrand.us/wattstopper.

Installation shall be in accordance with all applicable regulations, local and 

NEC codes. 

Wire connections shall be rated suitable for the wire size (lead and 

building wiring) employed. 

For Class 2 DLM devices and device wiring: To be connected to a Class 2 power 

source only. Do not reclassify and install as Class 1, or Power and Lighting Wiring.

SENSOR PLACEMENT

COVERAGE PATTERN

Coverages shown are maximum and represent half-step walking motion.

15 ft.

30 ft.

0

3 ft

3 ft

30ft

0

15ft

10 ft

10 ft 20 ft 30 ft 40 ft 50 ft

0

10 ft

10 ft 20 ft 30 ft 40 ft 50 ft

0

33˚

Top View

Side View

Sensor

Ceiling

Summary of Contents for LMPX-100-4

Page 1: ...ax Environment For Indoor Use Only Operating Temperature 32 to 131 F 0 to 55 C Storage Temperature 23 to 176 F 5 to 80 C Relative Humidity 5 to 95 non condensing Patent Pending This unit is pre set for Plug n Go operation adjustment is optional For full operational details adjustment and more features of the product see the DLM System Installation Guide provided with Wattstopper room controllers a...

Page 2: ...or DLM Local Network Low Voltage LMRJ Cables Loads 2 1 Line Hot Black wire Neutral White wire Red wire to Load A 1 Yellow wire to Load B 2 LMRC 102 MOUNTING WARNING Do Not Install To Cover a Junction Box Having Class 1 3 or Power and Lighting Circuits Through Ceiling Tile Through Wall Mounting plate Ceiling Hole 0 825 20 9mm dia Stem Base Swivel bracket Occupancy Sensor Ceiling Mounting plate Snug...

Page 3: ...ontrollers TROUBLESHOOTING Loads do not operate as expected LEDs don t light display is off 1 Check to see that the sensor is connected to the DLM local Network 2 Check for 24VDC input to the sensor Plug in a different DLM device at the sensor location If the device does not power up 24VDC is not present Check the high voltage connections to the room controller If high voltage connections are good...

Page 4: ...éfauts de matériaux et de fabrication pour une période de cinq 5 ans Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété de revenus ou de profits ou aux coûts d enlèvement d installation ou de réinstallation Wattstopper garantiza que sus productos están lib...

Reviews: