manualshive.com logo in svg

wattstopper InteliSwitch AS-100, Installation Instruction

Share
Download
wattstopper InteliSwitch AS-100 Installation Instruction Download Page 8

WARRANTY INFORMATION

Watt Stopper/Legrand warranties its products to be free of defects in materials 
and workmanship for a period of fi ve (5) years. There are no obligations or 
liabilities on the part of Watt Stopper/Legrand for consequential damages arising 
out of, or in connection with, the use or performance of this product or other 
indirect damages with respect to loss of property, revenue or profi t, or cost of 
removal, installation or reinstallation.

2800 De La Cruz Boulevard, Santa Clara, CA 95050

Technical Support: 800.879.8585

www.wattstopper.com

01862r6  7/2008

Please 

Recycle

ORDERING INFORMATION

 Catalog # 

Description

  AS-100* 

Automatic Control Switch

  ASP-211 

Cover plate for single-gang box (one included with each switch)

  ASP-422 

Blank cover plate for double-gang box

  ASP-432 

Cover plate for double-gang box with switch option

* - W for white, I for ivory, A for light almond

Cover Plates

The Watt Stopper InteliSwitch AS-100 Automatic Control Switch fi ts behind 
industry standard decorator-style cover plates. Watt Stopper has both single- and 
double-gang switch plates available in most confi gurations. Consult the Watt 
Stopper product selection guide or your distributor for more information.

Summary of Contents for InteliSwitch AS-100









Reviews:

No comments

Brands by name

Popular brands

Load more brands