www.wattsmall.com
2
Assembly
Remove the heater and all the accessories from the carton.
Turn the heater upside down.
Position the wheel base assemblies between the end fins.
Turn the heater the right way up.
Operation
Place the heater on the floor at least 90 cm away from the wall and any other objects
such as furniture, curtains or plants.
(Make sure the power supply used corresponds to the one on the rating label)
With the thermostat control switch and the power setting switches in the '0' position,
plug the heater into the main power supply.
Room temperature can be adjusted using the thermostat simply. Turn the thermostat knob
clockwise, to increase the heat, and anti-clockwise to decrease the temperature, until you
reach the desired temperature.
Switch the heater.
The power switch lights up when activated.
Turning the thermostat control clockwise will increase the "set" temperature.
Turning the thermostat anti-clockwise will decrease the "set" temperature.
Do not cover the heater at any time during operation. There is a risk of fire if the heater is
covered.
