○ From the BMS software, perform an extract of the available properties: list
the data types provided by the different devices to which the BMS has
access.
○ If it is impossible to retrieve this information, get the IP address and TCP port
(and if needed, for some devices, the slave address (Slave ID), the brand,
and model of the equipment, and extra identifying information. This
information is necessary for the installation configuration and to retrieve data.
● In the case of a BACnet IP network
○ Write down the BACnet port of the network. This information will be
necessary for the installation configuration and to retrieve data.
In case of LON IP-852 network
Connection:
● Make sure to have an Ethernet cable.
● Connect the cable to the Ethernet ports of the Box ETH1 or ETH2.
11
2022-05 V1.4
