11
6.2.2 RFID Charging Mode
When the charging station is on standby, plug in the connector
to your EV, and the LED will turn blue from purple.
Tap the RFID card on the RFID Reader.
The LED will be flashing green while charging.
Tap the RFID card on the RFID Reader again to stop charging.
When your EV is fully charged, the LED will be solid green,
unplug the connector and place it back into the holster.
6.2.1 How to the Enable the RFID Cards
6.2 RFID Mode
A) When the charging station is on standby, press the RESET button and
hold till the LED turns orange from purple.
B) Place the RFID card into the RFID Reader (Interrogator) within 15
seconds and wait till the LED turns back to purple.
NOTE
1. Another RFID card will automatically be enabled without any
operation.
2. Once you enable the RFID mode, the plug-and-charge mode
will be disabled, if you want to use the plug-and-charge mode,
please contact us for tech support.
