The Pressure Sensor 088 provides a ratiometric signal to a
controller to measure the pressure of a hydronic system between
0 to 150 psi (0 to 1034 kPa). The sensor bulb is designed to
install into a tee using
1
⁄
8
"-27 NPT threads and includes a
10 foot (3 m) long cable.
Introduction
IOM-T-088
Installation, Operation and Maintenance
Pressure Sensor 088
WARNING
!
Please read carefully before proceeding with
installation. Your failure to follow any attached
instructions or operating parameters may lead to
the product’s failure.
Keep this Manual for future reference.