6
QS-SH-Leak Defense 2216 2022-04-26 © 2022 Sentinel Hydrosolutions, LLC
The alarm started
sounding and I am home.
What should I do?
– If you are unaware of any
normal appliance or fixture
water flow...
And you don’t believe your water settings are set too conservative-
ly, you will want to check for leaks . These can often be small leaks
such as old toilet flappers, outdoor garden hose spigots, or small
drips from tub or sink faucets .
– If the water flow is due to a routine activity that normally
occurs within your household...
You may want to adjust the Leak Defense System settings . If so,
you will first select
Clear Alarm
and then select
Turn Water On
.
You can then:
1 . Increase the
Time to Alarm
setting or
2 . For humidifiers and under-sink reverse osmosis (RO)
systems increase the Trip Rate setting .
*Increasing the Trip Rate will make your system less sensitive to smaller leaks.
– If you are filling your swimming
pool
, using a hose bib for an
extended time, or running water for some other reason...
Do the following after selecting
Clear Alarm
and then selecting
Turn Water On
:
1 . Tap the
Scene
button and select
Standby
.
2 . Tap the
Time
icon and enter the amount of time in minutes
desired for the system to remain in
Standby
(Max is 48 hours
or 2,880 minutes) .
3 . Tap the top right box to confirm the time .
Let us help!
Call 760-884-8300 ext. 2
Email [email protected]
CLEARING THE ALARM
