![background image](http://html1.mh-extra.com/html/watts/lync-wq-as/lync-wq-as_installation-operation-and-maintenance-manual_3867833016.webp)
Lync WQ-AS
SECTION 3: OPERATION
L- OMM-007_A
•
5/6/2022
Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
16
of
42
4- Set Up Screen
Upon touching
, the screen allows the user to select a
language as well as the bypassing and silencing of alarms.
Touching the house icon from any of these sub-screens will return the user to the
Home
Screen
.
3.6.3. Normal Operation
System checks are automatically executed by the controller in the
Start Up Screen
, then the
system advances to the
Lamp Warm Up Screen
. If an abnormal condition exists, a variety of
alarms can be displayed.
3.6.4. Possible Alarms
Upon start-up of the system, if the UV sensor is not found, the
user will be notified via this screen. The system will continue to
the
Home Screen
when a UV sensor is not found and display
the warning message.
The lamp identifies it
’s self via radio frequency. If the wrong
lamp is used in a system, this message will appear during start
up.
Every 15 seconds the screen will change from the Invalid Lamp
Type message to the Name of Dealer message. Touch the QR
Code to display the correct lamp QR code in full.