![background image](http://html1.mh-extra.com/html/watts/lync-element-q/lync-element-q_installation-and-operation-manual_3835369120.webp)
Element
Operation and Maintenance
L-OMM-0003_A
• 10/8/2021 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
120
of
157
13
AQUASOLVE ANTI-SCALE OPERATION AND MAINTENANCE
The Lync AquaSolve Anti-Scale System prevents scale formation on internal plumbing surfaces
by transforming the normal dissolved hardness minerals into undissolved crystal microparticles.
These crystals stay suspended in the water and have a greatly reduced ability to react and
attach to surfaces, minimizing scale buildup in pipes, water heaters and on fixtures and glass.
AquaSolve Anti-Scale is not a water softener or a chemical additive (like an anti-scalant or
sequestrants). It is a scale prevention device with proven third-party laboratory test data and
years of successful residential and commercial installation. AquaSolve Anti-Scale is the one
water treatment device that effectively provides scale protection and is a great salt free
alternative to water softening (ion exchange) or scale sequestering chemicals. Laundry and
warewashing chemistry will like-wise require adjustments.
13.1 AquaSolve Anti-Scale Benefits
AquaSolve Anti-Scale provides chemical-free scale prevention and protection by converting
hardness minerals into harmless, inactive microscopic crystals, thus making it an effective
alternative water softener technology. Its advantages include:
•
Virtually maintenance free
– no control valve.
•
Environmentally friendly - no salt or chemicals to add, no electricity and no wastewater.
•
Improves efficiency of all water using appliances
– both hot** and cold. NOTE: For hot
water applications where feed water temperature is 100° - 140°F (38° - 60°C), please
contact your local Lync representative.
•
Safe for landscaping and lawn watering, no need for costly bypass plumbing.
•
Compatible with all on-site and community wastewater treatment systems.
•
Perfect for towns or communities where water softeners are banned or restricted.
•
Does not remove minerals or add sodium to the water supply.
•
Can be installed as pre-treatment to commercial reverse osmosis systems (contact your
local Lync representative for further details).
WARNING!
Do not use water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. Systems are certified through WQA against NSF 61,
CSA B483.1, and to NSF 372 for Lead Free compliance.
13.2 Specifications
The AquaSolve Anti-Scale system must operate in an upflow manner and does not require
additional water to backwash, flush, or regenerate once put into service. The system does not
require any chemical additives and does not require electricity for operation.
13.3 Standards
Independent scientific testing has confirmed Template Assisted Crystallization (TAC) technology
provides scale reduction of over 95%. Testing was conducted under protocol based on DVGW
W512 test to access control of scale formation.
NOTE:
Spotting may occur on external plumbing surfaces.