background image

HIU2-IM-DE-W-DE-08-2018-Rev1_DE-enUS | Art. No. 10078860

5

EN

ENGLISH

3  Safety

3.1  Depiction of safety information

DANGER indicates an imminent danger 
that may cause serious physical injury or 
death if the appropriate safety precau-
tions are not in place.

WARNING indicates a danger arising 
through incorrect behavior (e.g. misuse, 
disregarding notices, etc.) that may cause 
serious physical injury or death.

CAUTION indicates a potentially danger-
ous situation that may cause minor or 
slight injuries if the appropriate safety 
precautions are not in place.

NOTICE indicates a situation that may 
cause material damage if the correspond-
ing precautions are not taken.

3.2  Important safety information

•  Before using the device, read this operating manual 

through carefully.

•  Only connect the HIU 2 to a power source that corre-

sponds to the mains voltage specified on the rating plate of 
the HIU 2.

•  The power supply to the HIU 2 must be disconnected prior 

to maintenance, cleaning and repair work.

•  Maintenance, cleaning and repair work may be carried out 

by trained specialist personnel only.

•  The HIU 2 must not be used if it is damaged or if the HIU 2 

is no longer operating correctly. In this case, contact your 
specialist dealer immediately.

•  Observe the maintenance instructions and intervals.

•  Protect the HIU 2 from the influences of weather.

•  Never use the HIU 2 outdoors.

•  The unit may be used only in accordance with its intend-

ed use.

3.3  Intended use

Ready-to-install compact, decentralized heat interface unit for 
hygienic domestic hot water generation and heat distribution 
in single-family houses and townhouse systems as well as for 
use in multi-story apartment blocks.

The HIU 2 is not intended to be operated by people (includ-
ing children) with physical, sensory or mental disabilities, nor 
by people with insufficient experience or previous knowledge.

3.4  Foreseeable misuse

The following is considered to be foreseeable misuse:

•  Operating the HIU 2 contrary to the specifications

•  Improper use of the HIU 2

•  Modifications to the HIU 2 that were not agreed with the 

manufacturer

•  Use of replacement or wear parts that were not approved 

by the manufacturer

•  Operating the HIU 2 outdoors (parts and components are 

not UV resistant)

•  Use of prohibited media

3.5  Responsibilities of the operator

The operator must ensure that:

•  the HIU 2 is only used for its intended purpose

•  the HIU 2 is installed, operated and maintained accord-

ing to the specifications in the Installation and Operating 
Manual

•  the HIU 2 is only operated according to local regulations 

and occupational health and safety regulations

•  all precautionary measures have been carried out to avoid 

dangers originating from the HIU 2

•  all precautions for first aid and fire suppression are carried 

out

•  only authorized and trained users have access to the HIU 2 

and operate it

•  users have access to this installation and operating manual 

at all times

Summary of Contents for HIU 2 HK




















Reviews: