6
Retain the dust cover to protect the flood sensor during
temporary instances when the sensor activation module
may need to be removed or replaced.
NOTICE
3. Press the RESET button to activate the new settings.
(Not required whenever SW1 is set before the power
adapter is connected to a power supply.)
4. Reattach the cover with the four screws, making sure
the O-ring inside the cover is properly seated to maintain
a seal.
5. Remove the dust cover from the flood sensor.
6. Remove the O-ring from the dust cover and place it on
the sensor activation module to create a seal between
the module and the flood sensor.
7. Align the sensor activation module with cable with the
flood sensor.
8. Tighten the screws attaching the activation module to the
flood sensor.
