15
GB
the programmed values for day 1 are stored. Programming other days is done using identical procedure
moving the cursor by pressing
(
►)
. When you switch over to programming the next day the program for the
previous day is saved. On completing the programming of the last day 7, the indication first switches to the
program menu
, and in about 15 seconds back to
.
If during programming no inputs are made within 20 seconds, indication switches first to the program menu
, and in another 15 seconds it returns to
. The inputs were not stored.
Factory / built-in programs (P1
– P9)
If you select any of the factory programs from P1 to P9, you confirm it by pressing the key
(ОК)
. Then
pressing the arrow key
(
◄)
scroll back to the menu for selecting an operation mode (if the arrow key is not
pressed in about 15 seconds the display turns back to operating mode
).
6.2.1
Factory set COMFORT & REDUCED temperature times in programs P1 - P9
P1:
Morning, Evening & Week-end
P6:
Morning, Afternoon & Week-end
P2:
Morning, Midday, Evening & Week-end
P7:
7h - 19h (Office)
P3:
Day & Week-end
P8:
8h
– 19h , Saturday (Shop)
P4:
Evening & Week-end
P9:
Week-end (Secondary House)
P5:
Morning, Evening (bathroom)
The ClimaticControl-HC program operates only in
mode according to the selected COMFORT and RE-
DUCED temperature periods.
Summary of Contents for MS12832
Page 2: ...2 ...
Page 26: ...26 GB ...
