4
ON/OFF ELECTROTHERMIC ACTUATORS
Re-order no.67A-0041-IT/1-UK-09-14-Rev.0
Watts Industries Italia S.r.l.
Via Brenno, 21 - 20853 Biassono (MB), Italia
Tel. : +39 039 49.86.1 - Fax : +39 039 49.86.222
e-mail : [email protected]
www.wattsindustries.com
The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding.
Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice.
22CX 2-wires
Electrical wire connections
Overall dimensions (mm)
(Blue)
(Brown)
Thermostat
(Blue)
(Black)
(Brown)
(Brown)
(Brown)
Thermostat
Pump
Relay
1) Remove handle or cap from the valve body.
2) Place the actuator and manually tighten the ring nut of the actuator onto the
body valve.
DO NOT use pipe wrenches, spanners or similar.
3) Connect electrical wiring.
Important maintenance notes
Do not remove the cable. Opening the
22CX series
actuator will cause
irreparable damage to the device.
Faulty actuators must be replaced as complete sets.
Warning
IP54 is for horizontally or vertically mounting.
Mounting
(Grey
)
(Blue)
(Blue)
22CX 4-wires
40.5
49.5
52
M30 x 1,5
