40
Operation
The temperature control is
executed
operating
the
wheel manually.
NOTICE: do NOT press the
wheel while spinning it for
its correct running.
The temperature control can
also be done from the GATE
for a local, easy and quick
control or remotely from
wherever you are on the
mobile app.
How can you check the target temperature on the Thermic? Just spin slightly the wheel and
you will see the target temperature flickering on the screen for a couple of seconds.
CONSUMPTION
Once the Thermic is installed and registered, the current temperature is registered in the system
and historic temperature is so every 15 minutes, together with the time the heater is ON and
the target temperature. The temperature average values will be registered to build the historical
statistics, available via Wattio apps.
The historic chart display is explained below.
OPERATION MODES
The target temperature can be established setting different operation modes.
The Thermic has four operating modes, OFF, AUTO, MANUAL and an additional mode called
AUTO-MANUAL that activates automatically.
